|Place of Origin:||China|
|Certification:||ISO 9001/ API 6D|
|Model Number:||Y-Type Angle Seated Spring Check Valve|
|Minimum Order Quantity:||1Pcs|
|Packaging Details:||Usually packing by plywood case suit for sea delivery|
|Delivery Time:||10 working days|
|Payment Terms:||L/C, T/T, Western Union|
|Supply Ability:||10000 Pcs Per Month|
|Name:||Y-Type Angle Seated Spring Check Valve||Material:||316L|
|Application:||Oil, Gas, Water, Steam Etc||Type:||Swing Type|
|Temperature:||-20℃ 〜 160℃||Pressure:||56Bar|
Carbon Steel Ball Check Valve,
Flanged End Ball Type Check Valve,
Swing Flange Type Check Valve
DN50 FLANGED END Carbon Steel PN40 Din Standard Ball Type Flange Check Valve
The pressure of the fluid passing through a system opens the valve, while any reversal of flow will close the valve. Exact operation will vary depending on the type of Check valve mechanism. Most common types of Check valves are swing, lift (piston and ball), butterfly, stop and tilting-disk.
|Nominal pressue (MPa)||1.0||1.6|
|Applicable medium||Fresh water, Sewage, Sea water, Air, Vapor, Food, Medicine, Oils, Acids,|
|Operating mode||manual, worm gear, pneumatic, electric, etc.|
|Design & Manufacture||Flange Connection||Face to Face Dimension||Test & Inspection|
Swing Check valve
A basic swing Check valve consists of a valve body, a bonnet, and a disk that is connected to a hinge. The disk swings away from the valve-seat to allow flow in the forward direction, and returns to valve-seat when upstream flow is stopped, to prevent backflow.
The disc in a swing type Check valve is unguided as it fully opens or closes. There are many disk and seat designs available, in order to meet the requirements of different applications. The valve allows full, unobstructed flow and automatically closes as pressure decreases. These valves are fully closed when flow reaches zero, in order to prevent backflow. Turbulence and pressure drop in the valve are very low.
Lift Check valve
The seat design of a lift-Check valve is similar to a Globe valve. The disc is usually in the form of a piston or a ball.
Lift Check valves are particularly suitable for high-pressure service where velocity of flow is high. In lift Check valves, the disc is precisely guided and fits perfectly into the dashpot. Lift Check valves are suitable for installation in horizontal or vertical pipe-lines with upward flow.
Flow to lift Check valves must always enter below the seat. As the flow enters, the piston or ball is raised within guides from the seat by the pressure of the upward flow. When the flow stops or reverses, the piston or ball is forced onto the seat of the valve by both the backflow and gravity.
1. Small in size, light in weight, compact in structure,easy in maintenance.
2. Two torsion springs are used excreting on each of the pair valve plates,which close the plates quickly
3. The quick-close action prevents the medium from flowing back and eliminates water hammer effect.
4. Short body structure length and good rigidity.
5. This valve is tightly sealed, without leakage under the pressure water test.
6. Safe and reliable in operation,high interference-resistance.
Contact Person: Amy
Water Oil Base Gas Cast Steel SS 3 Way Ball Valve Flanged End Full Port Ball Valve
Stainless Steel Floating Ball Valve Three Way Simple Structure Easy Operation
4 Way Ball Valve SS316 Body / Ball / Stem PTFE seats Flange ANSI Class 150 Ball Valve
CF8 1.6MPa 2 Inch Stainless Steel Gate Valve , Class 150 Flange End Manual Gate Valve
SS304 DN100 PN16 Stainless Steel Gate Valve Powder Coated
ASTM A126 1" 175 PSI Rising Plug Valve 10000 PSI H Series Flanged Plug Valve
SS304 3/4'' 150LB Manual Globe Valve , Flanged Globe Valve Stainless Steel
1/2'' 150LB Manual Stainless Steel Globe Valve Flange End SS304 A351 CF8 Globe Valve
High Temperature WCB Globe Valve , 3/4'' 150LB Flange End Carbon Steel Globe Valve