DN25 CL300 RF CF3M Stainless Steel 316 Flange Swing Check Valve
|Product Name||Swing Check Valve|
|Standard||DIN GB JIS ANSI|
|Body and Ball Material||CF8 CF3 CF8M CF3M WCB PVC UPVC PP|
|Thread||-29~150(PTFE), -29~200( PTFE+GLASS), -29~300(J2 PPL)|
|Steam Seat and Gasket||PTFE|
Swing check valve, full port, 316SS, metal/metal seat, BSP ends. Rated to 200 psi (14 bar)
Size- 3/8″ (DN10) – 3″ (DN80)
* Options: NPT end connections
What is a Check Valve?
The valve that used to prevent backflow in a piping system is known as a check valve. It is also known as
a non-return valve or NRV. The pressure of the fluid passing through a pipeline opens the valve, while any
reversal of flow will close the valve.
It allows full unobstructed flow and automatically shuts as pressure decreases. The exact operation will vary
depending on the mechanism of the valve.
Stainless Steel Check Valve Standards
Face to face dimensions as ANSI B16.10
End flange dimension as ANSI B16.5
Pressure-temperature ratings as ANSI B16.34
Pressure test as API 598
Applicable Medium: water ,gas,oil,and other causticity medium.
Stainless Steel Check Valve Application:
Valve is used for preventing the back-going of medium in pipelines and equipments, and the pressure of
medium will bring the result of opening and closing automatically.
When the medium is back-going, valve disc will automaticaly closed to avoid accidents.
Stainless Steel Check Valve Test Pressure
|Test Item||Shell Test||Seal Test||Back Seal Test||Air Seal Test|
Types of Valves
The type of disk will decide the type of valve. Most common types of Check valves are
Dual Plate Type
Stop Check Valve
The disc in a swing type valve is unguided as it fully opens or closes. This Valve operates when there is flow
in the line and get fully closed when there is no flow. Turbulence and pressure drop in the valve is very low.
Disk and seat designs can be of metal to metal or metal to composite.
The angle between the seat and the vertical plane is known as the seating angle and varies from 0 to 45 degrees.
Usually, the seat angles are in the range of 5 to 7 degrees. Larger seat angles reduce the disc travel, resulting in
quick closing, thus minimizing the possibility of water hammer. A vertical seat has a 0-degree angle.
The swing type valve allows full, unobstructed flow and automatically closes as pressure decreases. Usually installed
in combination with gate valves because they provide relatively free flow combinations.
A basic swing type valve consists of a valve body, a bonnet, and a disk that is connected to a hinge.
We choose suitable wood cases according to different valves and arrange skilled workers to pack in case of bruise. Long term cooperated forwarder will book space, clear customs and transport for us without delay. There are three ways for transportation, by sea, by air and by train. We will arrange transportation according to customers' needs.
Delivery Details: According to the order, 7~60days
Swing Check Valve
Contact Person: Ms. TOBO
Water Oil Base Gas Cast Steel SS 3 Way Ball Valve Flanged End Full Port Ball Valve
Stainless Steel Floating Ball Valve Three Way Simple Structure Easy Operation
4 Way Ball Valve SS316 Body / Ball / Stem PTFE seats Flange ANSI Class 150 Ball Valve
CF8 1.6MPa 2 Inch Stainless Steel Gate Valve , Class 150 Flange End Manual Gate Valve
SS304 DN100 PN16 Stainless Steel Gate Valve Powder Coated
ASTM A126 1" 175 PSI Rising Plug Valve 10000 PSI H Series Flanged Plug Valve
SS304 3/4'' 150LB Manual Globe Valve , Flanged Globe Valve Stainless Steel
1/2'' 150LB Manual Stainless Steel Globe Valve Flange End SS304 A351 CF8 Globe Valve
High Temperature WCB Globe Valve , 3/4'' 150LB Flange End Carbon Steel Globe Valve