Send Message


Home News

A351 316 Stainless Steel Swing Check Valve 3″ 150 RF CF8M T12

Company News
A351 316 Stainless Steel Swing Check Valve 3″ 150 RF CF8M T12
Latest company news about A351 316 Stainless Steel Swing Check Valve 3″ 150 RF CF8M T12

3″ 150 RF CF8M T12 A351 316 Stainless Steel Swing Check Valve


What is a Check Valve?


The valve that used to prevent backflow in a piping system is known as a check valve. It is also known as a non-return valve or NRV. The pressure of the fluid passing through a pipeline opens the valve, while any reversal of flow will close the valve.

It allows full unobstructed flow and automatically shuts as pressure decreases. The exact operation will vary depending on the mechanism of the valve.


Quick Details


Product Name CHECK VALVE
Material stainless steel
Color nickel white
Class 150LB(16)~600LB(2500)
Body and Ball Material CF8 CF3 CF8M CF3M WCB PVC UPVC PP
Thread -29~150(PTFE), -29~200( PTFE+GLASS), -29~300(J2 PPL)
Steam Seat and Gasket PTFE


Stainless Steel Check Valve Standards

Face to face dimensions as ANSI B16.10

End flange dimension as ANSI B16.5

Pressure-temperature ratings as ANSI B16.34

Pressure test as API 598

Applicable Medium: water ,gas,oil,and other causticity medium.


Stainless Steel Check Valve Application:


Valve is used for preventing the back-going of medium in pipelines and equipments, and the pressure of medium will bring the result of opening and closing automatically.

When the medium is back-going, valve disc will automaticaly closed to avoid accidents.


Stainless Steel Check Valve Test Pressure


Test Item Shell Test Seal Test Back Seal Test Air Seal Test
Medium Water Air
Unit MPa lbf/in2 MPa lbf/in2 MPa lbf/in2 MPa lbf/in2
Pressure (Class) 150 3.1 450 2.2 315 2.2 315 0.5-0.7 60-100
300 7.8 1125 5.6 815 5.6 815
400 10.3 1500 7.6 1100 7.6 1100
600 15.3 2225 11.2 1630 11.2 1630
900 23.1 3350 16.8 2440 16.8 2440
1500 38.4 5575 28.1 4080 28.1 4080


Types of Valves


The type of disk will decide the type of valve. Most common types of Check valves are

  • Swing Type.

    • Top Hinged

    • Tilting disk

  • Lift Type

    • Piston Type

    • Ball type

  • Dual Plate Type

  • Stop Check Valve


Swing Check Valve


A351 316 Stainless Steel Swing Check Valve 3″ 150 RF CF8M T12 0


The disc in a swing type valve is unguided as it fully opens or closes. This Valve operates when there is flow in the line and get fully closed when there is no flow. Turbulence and pressure drop in the valve is very low.

Disk and seat designs can be of metal to metal or metal to composite.

The angle between the seat and the vertical plane is known as the seating angle and varies from 0 to 45 degrees.

Usually, the seat angles are in the range of 5 to 7 degrees. Larger seat angles reduce the disc travel, resulting in quick closing, thus minimizing the possibility of water hammer. A vertical seat has a 0-degree angle.

The swing type valve allows full, unobstructed flow and automatically closes as pressure decreases. Usually installed in combination with gate valves because they provide relatively free flow combinations.

A basic swing type valve consists of a valve body, a bonnet, and a disk that is connected to a hinge.


Parts of Non-Return Valve


It is consists of body, cover, disk, hinge pin, and seat ring. In the image below you can see the parts of the valve.


A351 316 Stainless Steel Swing Check Valve 3″ 150 RF CF8M T12 1


Packing Details:


We choose suitable wood cases according to different valves and arrange skilled workers to pack in case of bruise. Long term cooperated forwarder will book space, clear customs and transport for us without delay. There are three ways for transportation, by sea, by air and by train. We will arrange transportation according to customers' needs.

Delivery Details: According to the order, 7~60days



Pub Time : 2021-09-29 11:25:11 >> News list
Contact Details

Contact Person: Ms. TOBO

Tel: 021-31262012

Send your inquiry directly to us