ASTM A182 GR F53 2507 ASME B16.5 FLANGE ST/STEEL S32750 WN RF 150LBS SIZE 1/2" SUPERDUPLEX STAINLESS STEEL NECK FLANGE
|Product Name||WELDING NECK FLANGE|
|Standard||ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, 7S-15, 7S-43, 605, EN1092|
|Type||WELDING NECK FLANGE SPECIAL FLANGE: According to the drawing Picture|
Nickel Alloy: ASTM/ASME S/B366 UNS N08020, N04400, N06600, N06625, N08800, N08810, N08825, N10276,N10665,N10675, Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276
Stainless steel: ASTM/ASME S/A182 F304, F304L, F304H, F316, F316L, F321, F321H, F347H
ASTM A350 LF1; LF2; A350 LF3 ;LF4;LF6;LF8
Copper Alloy:ASTM AB564 , NO6600/ Alloy 600, NO6625/ Alloy 625, Alloy 690, Alloy 718
Inconel Alloy Steel:ASTMAB564, NO8800/Alloy800, NO8810/Alloy800H, NO8811/Alloy 800HT
Carbon Steel: ASTM/ASME S/A105, ASTM/ASME S/A350 LF2, ASTM/ASME S/A694/A694M, F42, F52, F56, F60, F65, F70....ASTM/ASME S/A350 LF2, ASTM/ASME S/A694/A694M, F42, F52, F56, F60, F65, F70....
900# : DN15-DN1000
|Marking||Supply Logo + Standard + Size(mm) + HEAT NO +or as your requirement|
|Test||Chemical Component Analysis, Mechanical Properties, Metallurgical Analysis, Impact Testing, Hardness testing , Ferrite Testing, Intergranular corrosion testing, X-ray Inspection (RT), PMI, PT, UT, HIC & SSC test, etc. or as your requirement|
|Certificates||3.1. (Any third party certificate should be clarified before order)|
WELD NECK FLANGES also called a tapered hub flange or high-hub flange, is a kind of flange that can relocate stress to the pipes, ensuring a decrease in high-stress concentration at the bottom of the flange.
WELD NECK FLANGES are flanges that designed to be jointed to a pipeline by butt welding. The neck, or hub, transmits stresses to the pipeline, reducing stress concentrations at the base of the weld neck flange. The bore of the Weld-Neck flange matches the bore of the pipe, reducing turbulence and erosion.
Contact Person: Ms. TOBO