Send Message

TOBO STEEL GROUP CHINA

Home News

Body SS304 Wafer Check Valve 2'' PN10 Seat EPDM High Safety And Reliability

Company News
Body SS304 Wafer Check Valve 2'' PN10 Seat EPDM High Safety And Reliability
Latest company news about Body SS304 Wafer Check Valve 2'' PN10 Seat EPDM High Safety And Reliability

Body SS304 Wafer Check Valve 2'' PN10 Seat EPDM High Safety And Reliability

 

Product introduction

 

The wafer flange clamped butterfly check valve is a energy-save product.It is manufactured based the foreign advanced technology and in accordance with relative international standards.This product is featured by excellent retaining per-formance,high safety and reliability and low flow resistance.It is suitable for systems in the industries of petrochemical food processing,medicine,textile,paper-making.Water,supply,drainage,metallurgy,energy,and light industry,etc,used as a check valve in one way.

 

Quick Details

 

Product Name CHECK VALVE
Material stainless steel
Color nickel white
Standard DIN GB JIS ANSI
Class 150LB(16)~600LB(2500)
Body and Ball Material CF8 CF3 CF8M CF3M WCB PVC UPVC PP
Thread -29~150(PTFE), -29~200( PTFE+GLASS), -29~300(J2 PPL)
Steam Seat and Gasket PTFE

 

Technical Specifications

>P.T Ratings to ASME B16.34
>Face to Face Dimensions to ASME B16.10
>Flanged Ends to ASME B16.5
>Butt-weld Ends to ASME B16.25
>Valves Marking to MSS SP-25
>Inspect & Tested to API 598
>Size Ranges from 1/2″ thru 60″.
>Structured in One Piece Union Body
>Pressure Ratings from Class 150 to Class 2500, PN16 to PN420
>Ends Connections in Flanged R.F or RTJ, Wafer, Fully Lugged and Grooved
>A variety of body and trim material is offered, including carbon steel ASTM A216 WCB, WCC; Cast or Ductile iron A126, GG25, A536 or GGG50, Low Carbon Steel LCB, LCC, Alloy Steel WC6, WC9, C5, Stainless Steel CF8, CF8M, CF3, CF3M, Duplex & Super Duplex Steel A890 GR. 4A,5Aor F51, Special Materials in Monel, Alu. Bronze C95800, 95600 etc. Coatings may be provided for added corrosion or wear resistance. Hard-facing and weld overlays may also be supplied. Seats Options with metal-to-metal or bubble-tight resilient. Optional Bypass system & Counter-weight Assembly.

 

Stainless Steel Check Valve Application:

 

Valve is used for preventing the back-going of medium in pipelines and equipments, and the pressure of medium will bring the result of opening and closing automatically.

When the medium is back-going, valve disc will automaticaly closed to avoid accidents.

 

Stainless Steel Check Valve Test Pressure

 

Test Item Shell Test Seal Test Back Seal Test Air Seal Test
Medium Water Air
Unit MPa lbf/in2 MPa lbf/in2 MPa lbf/in2 MPa lbf/in2
Pressure (Class) 150 3.1 450 2.2 315 2.2 315 0.5-0.7 60-100
300 7.8 1125 5.6 815 5.6 815
400 10.3 1500 7.6 1100 7.6 1100
600 15.3 2225 11.2 1630 11.2 1630
900 23.1 3350 16.8 2440 16.8 2440
1500 38.4 5575 28.1 4080 28.1 4080

 

Types of Valves

 

The type of disk will decide the type of valve. Most common types of Check valves are

  • Swing Type.

    • Top Hinged

    • Tilting disk

  • Lift Type

    • Piston Type

    • Ball type

  • Dual Plate Type

  • Stop Check Valve

 

Swing Check Valve

 

Body SS304 Wafer Check Valve 2'' PN10 Seat EPDM High Safety And Reliability 0

 

The disc in a swing type valve is unguided as it fully opens or closes. This Valve operates when there is flow in the line and get fully closed when there is no flow. Turbulence and pressure drop in the valve is very low.

Disk and seat designs can be of metal to metal or metal to composite.

The angle between the seat and the vertical plane is known as the seating angle and varies from 0 to 45 degrees.

Usually, the seat angles are in the range of 5 to 7 degrees. Larger seat angles reduce the disc travel, resulting in quick closing, thus minimizing the possibility of water hammer. A vertical seat has a 0-degree angle.


The swing type valve allows full, unobstructed flow and automatically closes as pressure decreases. Usually installed in combination with gate valves because they provide relatively free flow combinations.

A basic swing type valve consists of a valve body, a bonnet, and a disk that is connected to a hinge.

 

Parts of Non-Return Valve

 

It is consists of body, cover, disk, hinge pin, and seat ring. In the image below you can see the parts of the valve.

 

Body SS304 Wafer Check Valve 2'' PN10 Seat EPDM High Safety And Reliability 1

 

Valve main parts and material

No Parts Name Materials
Body 304 LCB LCC WC6 WC9 CF8 CF8M CF3 CF3M
Stem 304 LCB LCC WC6 WC9 CF8 CF8M CF3 CF3M
Spring 304 LCB LCC WC6 WC9 CF8      
Gasket 150~600LB, STAINLESS STEEL WINDING GASKET
Bolt B7 L7M L7M B16 B16 B8 B8 B8 B8
Nut 2H 7M 7M 4 4 8 8 8 8
Standard
Standard      
Design&Manufacture API 594 API6D JB/TB937
Face to face API594 DIN3202 JB/T8937
Pressre-Temperature ASME B16.34 DIN2401 GB/T9124
Pipe Flange JB/71-90 JB/T9112-9124  
 
PN Mpa SIZE(mm) L D D3 D2
1.6Mpa 40 60 96 46 41
50 60 109 56 51
65 67 129 73 65
80 73 144 88 80
100 73 164 108 102
125 86 194 132 127
150 98 220 160 152
200 127 275 210 203
250 146 332 266 254
300 181 387 310 305
350 184 447 355 350
400 191 498 405 400
450 203 558 455 450
500 219 618 505 500
600 222 732 605 600
700 305 802 700 695
800 305 912 800 796
900 368 1012 903 898
1000 432 1124 1055 1050
1200 524 1340 1200 1400

 

 

 
Pub Time : 2022-03-04 18:03:29 >> News list
Contact Details
TOBO STEEL GROUP CHINA

Contact Person: Ms. TOBO

Tel: 021-31262012

Send your inquiry directly to us