CF3M High-Pressure Temperature DN20 PN25 Stainless Steel Ball Valve
|SPECIFICATIONS FOR STEEL GLOBE VALVES|
Pressure rating and size:
|DN40 to DN600|
|Material:||Body : A216-WCB,A325-LCB,A217-WC6,CF8,CF8M|
|Disc : A105+13Cr, SS304, SS316|
|Stem : A182+F6a,A182-F6a|
|Structure:||stopcock for water|
|Flange connection:||ASME B16.5,EN1092|
|Butt-weld ends:||ASME B16.25|
|Temperature:||-20 to 425°C|
A Ball valve is a quarter-turn rotary motion valve that uses a ball-shaped disk to stop or start the flow.
It resembles a plug valve in many ways. When a port in the ball is in line, it allows flow whereas when you
rotate the valve 90 degrees, solid part of the ball stop the flow.
Most ball valves are of the quick-acting type, which requires a 90° turn of the valve handle to operate the valve.
But in case large size valve which required considerable force to open or close the valve, the gear-operated
actuator is used. With this arrangement, a small handwheel is enough to operate a fairly large valve.
In this article, I have covered following types of Ball Valves that used in piping.
Side entry or split body
Applications of the Valve
It can be used in different types of fluid services as an on-off stop valve that provides bubble-tight shutoff.
It can be used in air, gaseous, and vapor services as well as hydrocarbon services.
Metal seated valves can be used in high-pressure & temperature applications.
it is widely used with instrument tubing to connect instruments.
It is quick to open and close type that provides bubble-tight reliable sealing in high-pressure temperature applications.
It is smaller and lighter than a gate valve of the same size and rating.
Several designs of ball valves offer the flexibility of selection so that you can choose the valve that suits your requirements.
Easy to operate and Cost-effective maintenance.
2.Anti-fire safe design
4.Free leakage of body Sealed construction
5.Low torque in operation
8.Extension stem at your choice
9.Automatic body cavity relief
10.Various driving types: gear, lever, electric, hydraulic, pneumatic
Design and manufacture: ANSI B16.34, API 608, API 6D, BS5351
Face to face dimensions: ANSI B16.10, API 6D
Flanged connection: ANSI B16.5, ANSI B16.47
Butt welded: ANSI B16.25
Fie-safe: API 607, API 6FA
Test and inspection: API 598, API6D
Valves are wrapped in plastic bubble sheet & in plywood boxes
Lead Time :
|Quantity(Sets)||1 - 100||>100|
|Est. Time(days)||25||To be negotiated|
Other Ball valve
Split-Body Ball Valve
In this design, a valve body is divided into two or three body parts. A ball, seat rings, stem, and other internals
set inside the larger body part and held together with smaller parts by bolting.
For a split body, two pieces valve, refer floating ball valve image. Refer below image for split body three pieces type valve.
CF3M Stainless Steel Ball Valve,
Stainless Steel Flanged Ball Valve,
WCB Floating Ball Valve
Contact Person: Ms. TOBO
Water Oil Base Gas Cast Steel SS 3 Way Ball Valve Flanged End Full Port Ball Valve
Stainless Steel Floating Ball Valve Three Way Simple Structure Easy Operation
4 Way Ball Valve SS316 Body / Ball / Stem PTFE seats Flange ANSI Class 150 Ball Valve
CF8 1.6MPa 2 Inch Stainless Steel Gate Valve , Class 150 Flange End Manual Gate Valve
SS304 DN100 PN16 Stainless Steel Gate Valve Powder Coated
ASTM A126 1" 175 PSI Rising Plug Valve 10000 PSI H Series Flanged Plug Valve
SS304 3/4'' 150LB Manual Globe Valve , Flanged Globe Valve Stainless Steel
1/2'' 150LB Manual Stainless Steel Globe Valve Flange End SS304 A351 CF8 Globe Valve
High Temperature WCB Globe Valve , 3/4'' 150LB Flange End Carbon Steel Globe Valve