DN200 WCB Flange End Z-Body Type Globe Valve High Temperature
Though the construction and design of globe valve is usually made according to the requirements,
there are three main designs of the globe valve
Z-body type valve
Y-body type valve
Z-body type valve
This is the simplest and most commonly used design of globe valves, favorable for applications involving water flow. The name Z-shaped is derived from the Z shaped diaphragm or partition in the bulbous shaped body. The stem and the disc move at right angle to the valve body, aligning with the horizontally arranged seat. The stem passes through the bonnet attached to a wide opening at the top.
|SPECIFICATIONS FOR STEEL GLOBE VALVES|
|Pressure rating and size:||PN10,PN25,PN40,PN64,150L-600LB|
|DN40 to DN600|
|Material:||Body : A216-WCB,A325-LCB,A217-WC6,CF8,CF8M|
|Disc : A105+13Cr, SS304, SS316|
|Stem : A182+F6a,A182-F6a|
|Structure:||stopcock for water|
|Flange connection:||ASME B16.5,EN1092|
|Butt-weld ends:||ASME B16.25|
|Temperature:||-20 to 425°C|
A Globe valves is a linear motion valve and are primarily designed to stop, start and regulate flow.
The disk of a Globe valve can be totally removed from the flowpath or it can completely close the flowpath.
Conventional Globe valves may be used for isolation and throttling services. Although these valves exhibit slightly
higher pressure drops than straight=through valves (e.g., gate, plug, ball, etc.), they may be used where the pressure
drop through the valve is not a controlling factor.
Because the entire system pressure exerted on the disc is transferred to the valve stem, the practical size limit for these
valves is NPS 12 (DN 300). Globe valves larger than NPS 12 (DN 300) are an exception rather than the rule. Larger
valves would require that enormous forces be exerted on the stem to open or close the valve under pressure. Globe
valves in sizes up to NPS 48 (DN 1200) have been manufactured and used.
Globe valves are extensively employed to control flow. The range of flow control, pressure drop, and duty must be
considered in the design of the valve to avert premature failure and to assure satisfactory service. Valves subjected
to high-differential pressure-throttling service require specially designed valve trim.
Generally the maximum differential pressure across the valve disc should not exceed 20 percent of the maximum
upstream pressure or 200 psi (1380 kPa), whichever is less. Valves with special trim may be designed for applications
exceeding these differential pressure limits.
Advantages and disadvantages of Globe valves
Typical Applications of Globe valves
The following are some of the typical applications of Globe valves:
We choose suitable wood cases according to different valves and arrange skilled workers to pack in case of bruise. Long term cooperated forwarder will book space, clear customs and transport for us without delay. There are three ways for transportation, by sea, by air and by train. We will arrange transportation according to customers' needs.
Delivery Details: According to the order, 7~60days
Contact Person: Ms. TOBO
Water Oil Base Gas Cast Steel SS 3 Way Ball Valve Flanged End Full Port Ball Valve
Stainless Steel Floating Ball Valve Three Way Simple Structure Easy Operation
4 Way Ball Valve SS316 Body / Ball / Stem PTFE seats Flange ANSI Class 150 Ball Valve
CF8 1.6MPa 2 Inch Stainless Steel Gate Valve , Class 150 Flange End Manual Gate Valve
SS304 DN100 PN16 Stainless Steel Gate Valve Powder Coated
ASTM A126 1" 175 PSI Rising Plug Valve 10000 PSI H Series Flanged Plug Valve
SS304 3/4'' 150LB Manual Globe Valve , Flanged Globe Valve Stainless Steel
1/2'' 150LB Manual Stainless Steel Globe Valve Flange End SS304 A351 CF8 Globe Valve
High Temperature WCB Globe Valve , 3/4'' 150LB Flange End Carbon Steel Globe Valve