5-8F 316L Body PTFE Seats NPT Or Tri-Clover Clamp Ends 3-Way Ball Valve
A Ball valve is a quarter-turn rotary motion valve that uses a ball-shaped disk to stop or start the flow.
It resembles a plug valve in many ways. When a port in the ball is in line, it allows flow whereas when you rotate the valve 90 degrees, solid part of the ball stop the flow.
Most ball valves are of the quick-acting type, which requires a 90° turn of the valve handle to operate the valve.
But in case large size valve which required considerable force to open or close the valve, the gear-operated actuator is used. With this arrangement, a small handwheel is enough to operate a fairly large valve.
In this article, I have covered following types of Ball Valves that used in piping.
Side entry or split body
3-way reduced port ball valve, side entry and discharge ports, 1,000/800psi, ISO5211 direct mount,
316SS body/ball/stem, RPTFE seats/seals, BSP ends, lever operated
Sizes/WP- ¼” → 1-¼” (DN8 → DN32) – 1,000 psi (69 Bar)
1½”→ 2” (DN40→ DN50) – 800 psi (55 Bar)
5-8RL = “L”-port (primarily used for diverting flow- single flow path in, diverts flow through the second port only whilst the third port is closed. Handle rotates 90° to switch (2nd port closes, 3rd opens)
5-8RT =“T”-port (can function as a L-port but many other flow options possible eg as mixing valve with 2 ports in which diverge into one outlet. All flow path options shown on data sheet)
* Options: Model 5-8F (Full port), 316L body, PTFE or High Temperature seats, NPT or Tri-clover clamp ends
|SPECIFICATIONS FOR STEEL GLOBE VALVES
Pressure rating and size:
||DN40 to DN600
||Body : A216-WCB,A325-LCB,A217-WC6,CF8,CF8M
||Disc : A105+13Cr, SS304, SS316
||Stem : A182+F6a,A182-F6a
||stopcock for water
||-20 to 425°C
Applications of the Valve
It can be used in different types of fluid services as an on-off stop valve that provides bubble-tight shutoff.
It can be used in air, gaseous, and vapor services as well as hydrocarbon services.
Metal seated valves can be used in high-pressure & temperature applications.
it is widely used with instrument tubing to connect instruments.
It is quick to open and close type that provides bubble-tight reliable sealing in high-pressure temperature applications.
It is smaller and lighter than a gate valve of the same size and rating.
Several designs of ball valves offer the flexibility of selection so that you can choose the valve that suits your requirements.
Easy to operate and Cost-effective maintenance.
2.Anti-fire safe design
4.Free leakage of body Sealed construction
5.Low torque in operation
8.Extension stem at your choice
9.Automatic body cavity relief
10.Various driving types: gear, lever, electric, hydraulic, pneumatic
Design and manufacture: ANSI B16.34, API 608, API 6D, BS5351
Face to face dimensions: ANSI B16.10, API 6D
Flanged connection: ANSI B16.5, ANSI B16.47
Butt welded: ANSI B16.25
Fie-safe: API 607, API 6FA
Test and inspection: API 598, API6D
Valves are wrapped in plastic bubble sheet & in plywood boxes
Lead Time :
||1 - 100
||To be negotiated
Types of Ball Valves:
Although ball valves can be divided into many types based on the functionality, there major two categories are given below:
Floating Ball Valve:
A floating ball valve does not have any anchor for holding the ball. However, there is a stem that is attached to the ball.
Due to this reason the fluid freely moves the ball downwards according to the pressure of the flow. A floating ball valve
is considered a great choice for regulating the flow of the valve.
Trunnion Ball Valve:
Unlike the floating ball valve, trunnion ball valve comes with an anchor on both sides of the ball. This additional support
provides pivot to the ball and helps contain the huge flow. Due to this reason, trunnion ball valves are very popular for the
applications, which involve the flow of high-pressure valves.