Send Message

TOBO STEEL GROUP CHINA

Home News

Flexible Graphite Filler150# 304 Spiral Wound Gasket Inner Ring And Outer Ring

Company News
Flexible Graphite Filler150# 304 Spiral Wound Gasket Inner Ring And Outer Ring
Latest company news about Flexible Graphite Filler150# 304 Spiral Wound Gasket Inner Ring And Outer Ring

Flexible Graphite Filler 8" Inner Ring 150#, 304 Spiral Wound Gasket

What is Spiral Wound Gasket?

Why did we call it SWG? SWG is a short form of Spiral Wound Gasket.
These gaskets are fabricated from thin metal strip sandwiched between layers of non-metallic filler. SWG has
alternative spiral layers of thin metal sheet and filler material as shown in the image. Here in the cross-section,
the blue layers are of metal, and the black layers are of filler material. As these layers are wounded in continuous spiral forms,
these types of gaskets are known as spiral wound gasket.

NPS) Classes
150, 300
Class 150 Class 300 Class 150 Class 300
Inch mm Inside Diameter Outside Diameter
1⁄2 31.8 19.1 19.1 47.8 54.1
3⁄4 39.6 25.4 25.4 57.2 66.8
1 47.8 31.8 31.8 66.8 73.2
1 1⁄4 60.5 47.8 47.8 76.2 82.6
1 1⁄2 69.9 54.1 54.1 85.9 95.3
2 85.9 69.9 69.9 104.9 111.3
2 1⁄2 98.6 82.6 82.6 124 130.3
3 120.7 101.6 101.6 136.7 149.4
4 149.4 127 127 174.8 181.1
5 177.8 155.7 155.7 196.9 215.9
6 209.6 182.6 182.6 222.3 251
8 263.7 233.4 233.4 279.4 308.1
10 317.5 287.3 287.3 339.9 362
12 374.7 339.9 339.9 409.7 422.4
14 406.4 371.6 371.6 450.9 485.9
16 463.6 422.4 422.4 514.4 539.8
18 527.1 474.7 474.7 549.4 596.9
20 577.9 525.5 525.5 606.6 654.1
24 685.8 628.7 628.7 717.6 774.7


Strength of Spiral Wound Gasket

Spiral Wound Gasket is the ideal gasket in the semi-metallic category. A narrow strip of V-shape metal hoop is spirally wound
under tension with a filler cushion between the lamination of the metal and is spot-welded at both ends.
This unique construction of a spring-like metal and soft filler provides gasket excel-lent characteristics.

Resistance to high temperature and high pressures.

Excellent sealability is maintained with comparatively small gasket area.
Great resilience which allows the gasket to adjust automatically to change in operating conditions, such as pressure and

These gaskets are extremely popular due to the wide variety of available styles and sizes.
SWG can be fabricated of any metal which is available in thin strip and which can be welded; therefore, they can be used
against virtually any corrosive medium.
They can be used over the complete temperature range from cryogenic to approximately 1093ºC. This type of gasket can
be used in all pressures from vacuum to the standard 2500 pressure class flange ratings.
Relatively low-density Spiral wound gaskets are used in vacuum service whereas extremely high-density Spiral wound gaskets
are used in high-pressure service. The density of gasket is nothing but a number of layers of filler and metal strip in the given
width of the gasket.

Tolerance in the Dimension of the Spiral Gasket

  • Thickness tolerance is ±0.13 mm measured across the metallic portion of the gasket, not including the filler, which may protrude slightly beyond the metal.

  • Outside diameter tolerance for NPS 1⁄2 through NPS 8 is ±0.8 mm; for NPS 10 through NPS 24, +1.5 mm, −0.8 mm.

  • Inside diameter tolerance for NPS 1⁄2 through NPS 8 is ±0.4 mm; for NPS 10 through NPS 24, ±0.8 mm.

  • The centering ring outside diameter tolerance is ±0.8 mm.

Components of Spiral Gasket

There are three components in the spiral wound gasket.

  • Outer Ring

  • Winding Material (Filler & Metal Strip)

  • Inner Ring


Flexible Graphite Filler150# 304 Spiral Wound Gasket Inner Ring And Outer Ring 0

 

 
Pub Time : 2021-12-16 11:24:53 >> News list
Contact Details
TOBO STEEL GROUP CHINA

Contact Person: Ms. TOBO

Tel: 021-31262012

Send your inquiry directly to us