Send Message

TOBO STEEL GROUP CHINA

Home News

PN16 CAST IRON GATE VALVE

Company News
PN16 CAST IRON GATE VALVE
Latest company news about PN16 CAST IRON GATE VALVE

amy@tobo-group.com

 

2 INCH PN16 CAST IRON NON RISING STEM RESILIENT GATE VALVE

Gate valves

Gate valves are primarily designed to start or stop flow, and when a straight-line flow of fluid and minimum flow restriction are needed. In service, these valves generally are either fully open or fully closed.

The disk of a Gate valve is completely removed when the valve is fully open; the disk is fully drawn up into the valve Bonnet. This leaves an opening for flow through the valve at the same inside diameter as the pipesystem in which the valve is installed. A Gate valve can be used for a wide range of liquids and provides a tight seal when closed.

latest company news about PN16 CAST IRON GATE VALVE  0

Part No. Part Standard Specification Options
1 Valve Body ASTM A536, 65-45-12  
2 Resilient Wedge Disc ASTM A536, 65-45-12+SPDM AISI 304, AISI 316, AISI 420,AISI 431
3 Stem Stainless Steel AISI 304, AISI 316, AISI 416
4 Bonnet Gasket EPDM NBR
5 Bonnet ASTM A536, 65-45-12  
6 Washer Brass Hpb59-1  
7 Yoke ASTM A536, 65-45-12  
8 Stem Bushing Brass Hpb59-1  
9 Gland ASTM A536, 65-45-12  
10 Stem Nut Brass Hpb59-1 Bronze ZQSn5-5-5
11 Handwheel ASTM A536, 65-45-12 Pressed Steel
12 Washer Brass Hpb59-1  
13 Gland Nut Carbon Steel Zinc Plated AISI 304, AISI 316
14 Stud Carbon Steel Zinc Plated AISI 304, AISI 316
15 Flat Washer Carbon Steel Zinc Plated AISI 304, AISI 316
16 Nut Carbon Steel Zinc Plated AISI 304, AISI 316
17 O-Ring NBR EPDM

 

 

 

Pub Time : 2022-02-22 22:50:25 >> News list
Contact Details
TOBO STEEL GROUP CHINA

Contact Person: Ms. TOBO

Tel: 021-31262012

Send your inquiry directly to us