Threaded Ball Valve DN15 - DN100 Pressure PN25 Cw 617n / HPB59-3 Brass Ball Cock Valve

Specification:

2" ~ 24"(DN50~DN600)

ANSI Ratings 150# ~ 2500# (PN16~PN420)

2 or 3 Pieces Body Construction

RF RTJ Connections

Valve Material :

Carbon cast Steel, Stainless cast Steel, Alloy cast Steel, Duplex cast Steel

Seat Coating Material:

Tungsten carbide, Stellite, Chrome Plating, Chrome Carbide etc.

Product Details

The cast steel metal seated ball valve is suitable for high temperature, serious corrosion, severe services condition containing solid granules, slurry, coal powder, cinder and etc. It has the features of reliable and safe sealing performance, long service life, easy operation. It can work under temperature range -46℃~450℃.

Feature:

Cast Metal to metal seal design between ball and seats

High temperature and low temperature ball valve

Fire-safe Certified API 607

Blowout-proof stem

Antic-static device

Double Block & Bleed Design

Low Fugitive Emission Packing

Cavity pressure self-relief

Seat designed with dust-proof

ISO 5211 Mounting Pad

Size of 3 Piece Internal Threaded Ball Valve:

A Ball valve is a quarter-turn rotary motion valve that uses a ball-shaped disk to stop or start the flow.

It resembles a plug valve in many ways. When a port in the ball is in line, it allows flow whereas when you

rotate the valve 90 degrees, solid part of the ball stop the flow.

Most ball valves are of the quick-acting type, which requires a 90° turn of the valve handle to operate the valve.

But in case large size valve which required considerable force to open or close the valve, the gear-operated

actuator is used. With this arrangement, a small handwheel is enough to operate a fairly large valve.

In this article, I have covered following types of Ball Valves that used in piping.

• Floating

• Trunnion Mounted

• 3 Way

• Top entry

• Side entry or split body

• Three-piece body

Applications of the Valve

• It can be used in different types of fluid services as an on-off stop valve that provides bubble-tight shutoff.

• It can be used in air, gaseous, and vapor services as well as hydrocarbon services.

• Metal seated valves can be used in high-pressure & temperature applications.

• it is widely used with instrument tubing to connect instruments.

• It is applied in food , bewerage, wine, pharmaceutical and chemical industries.

Advantages

• It is quick to open and close type that provides bubble-tight reliable sealing in high-pressure temperature applications.

• It is smaller and lighter than a gate valve of the same size and rating.

• Several designs of ball valves offer the flexibility of selection so that you can choose the valve that suits your requirements.

• Easy to operate and Cost-effective maintenance.

• The valve body can be replaced in any connections and the length will not change.

Features:

1.Forged ball
2.Anti-fire safe design
3.Anti-static device
4.Free leakage of body Sealed construction
5.Low torque in operation
6.Double block&bleed(DBB)
7.Emergency sealing
8.Extension stem at your choice
9.Automatic body cavity relief
10.Various driving types: gear, lever, electric, hydraulic, pneumatic

Standards Compliance

Design and manufacture: ANSI B16.34, API 608, API 6D, BS5351
Face to face dimensions: ANSI B16.10, API 6D
Flanged connection: ANSI B16.5, ANSI B16.47
Butt welded: ANSI B16.25
Fie-safe: API 607, API 6FA
Test and inspection: API 598, API6D

Packaging Details

Valves are wrapped in plastic bubble sheet & in plywood boxes

Port:China

Lead Time :

Specification of 3 Piece Internal Threaded Ball Valve: